Product ID:EA9430 PART A
MSDS Date:09/29/1989
FSC:8040
NIIN:01-124-2842
Kit Part:Y
MSDS Number: BKBMY

DEXTER ADHESIVES AND STRUCTURAL MATERIALS

2850 WILLOW PASS ROAD
PITTSBURG, CA 94565
US

Emergency Phone: 8OO-424-9300

Info Phone: 415-687-4201

Cage: 33564

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

EPOXY RESIN SYSTEM

SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: < 06%

OSHA PEL 20 MPPCF

ACGIH TLV: 0.1 MG/M3

< 10 G/L (ESTIMATED)

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTION.
Effects of Overexposure:SKIN RASH, IRRITATION.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH SKIN
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITA TION PERSISTS, SEE PHYSICIAN.

Flash Point Method:TOC
Flash Point:>300F,>149C
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, OR WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE (77F) FOR 12
MONTHS. KEEP COOL IN ACCORDANCE WITH LABEL INSTRUCTIONS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
WARNING: CAUSES EYE IRRITATION AND MAY CAUSE SKIN IRRITATION AS
ALLERGIC DERMATITIS. CONTAINS EPOXY RESINS. AVOID CONTACT WITH EYES
OR SKIN, WASH THOROUGHLY AFTER HANDLING. DO NOT HANDLE OR USE UNTIL
THE MSDS HAS BEEN READ AND UNDERSTOOD.

Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.01
Vapor Density:NIL
Spec Gravity:>1
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:GRAY PASTE, PUNGENT ODOR
Percent Volatiles by Volume:<0.01

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING MORE THAN 1/2 LB
RESIN/CURING AGENT.DO NOT HEAT MIX ADH +75F UNLESS CURING SURFACE
TO BE BONDED.TOXIC GASES

Waste Disposal Methods:DISPOSE OF AS HAZARADOUS WASTE ACCORDING TO
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.